Fixed

• Add I2C function

• When you connect the USB, the receiver and OSD settings can be saved

• Increase the pad area

• LED signal selection （when Mamba Led sys avaiable）

• BEC short circuit protection

• TVS instant high voltage protection 30V

Update

• F405 models support F.prot（Most）

• Upgrade the anti-interference cable

• Use Typec（Most）

• The pad area of Mini flight controller (20×20) increased by 140%

Added

• Add self-recovery insurance to the receiver's 5V power supply

• Increase the camera VCC power supply pad

• Standard flight controller (30.5×30.5) adds spare pad

• Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference

FC Specifications MAMBA Basic F722MINI MK3 MCU: 216MHz STM32F722RET6 GYRO: MPU Series Six-Axis Barometer: Yes OSD: Yes Blackbox: 16M Flash Memory Uarts: 6 Set ESC Soft: Dshot300/600 ESC Telemetry: Yes Power Led: Yes LED Controller: BF LED S/F.Port: Yes RSSI: Yes Buzz: Yes Input: 2~6S Lipo (8.4~25.2V) TVS Protection: Yes BEC:3.3V 0.5A& 5V 2.5A MOUNTING: 20mm, M2 ESC Specifications MAMBA F40_128K MINI INPUT VOLTAGE: 2~6S Lipo (8.4V~25.2V) CONTINUE CURRENT: 40A×4 BURST CURRENT: 45A (10S) BEC: No Target：BLHeli_32 MAMBA  F40_128K_MINI SOFT: Dshot300/600/1200 TVS Protection: Yes MOUNTING: 20mm,M3/M2

MAMBA F40_BLS MINI INPUT VOLTAGE: 2~6S Lipo (8.4V~25V) CONTINUE CURRENT: 40A×4 BURST CURRENT: 45A (10S)   BEC: No Target：BLHeli_S CH40 SOFT: Dshot300/600 TVS Protection: Yes MOUNTING: 20mm, M3/M2 Supply : High Frequency 470uF/35V ×1 8pin sh1.0 ×2 16AWG 60mm ×2 AMASS Original XT60

Recommend For : 3inch / 4inch / Ultralight 5inch